anticln5.qry

# anticln5.qry
# This is a sample script for drawing a geological line symbol
# for an anticline (solid, without arrows: for Japan).
# Modified to provide scaling for LegendView samples, August 2002;
# Modified to declare all variables, October 2005;
# Version Dec. 2007
# Requires TNTmips 2007:73 or later.
# Modified to adjust scale based on georeference map units and to
# put arrow symbols only at the center of each line.
numeric red, green, blue, scale;
numeric widthMap, width, lineSize, lengthMap, halfSize, dist;
class RVC_GEOREFERENCE vGeoref;
class SR_COORDREFSYS vectCRS;
###################### Set Parameters ##############################
# red, green, blue variables define the color of the line
red = 0;			green = 0;				blue = 0;
# This variable defines the denominator of the intended map scale.
# It is used as the basis for defining line width and symbol size
# and spacing.
# Example: for 1:24,000 map scale, scale = 24000
scale = 24000;
# This variable controls the width of the lines.
# WidthMap is the desired map width in mm, assuming vector
# coordinates are in meters.
widthMap = 0.3;
# This variable controls the length of the crossing lines
# LengthMap is the desired length in mm, assuming vector 
# coordinates are in meters:
lengthMap = 4;
# Check if vector has geographic coordinates (units of degrees instead of meters) 
# and if so adjust scale factor to draw symbols of appropriate size.
Vect.GetDefaultGeoref(vGeoref);
vectCRS = vGeoref.GetCoordRefSys();
if (vectCRS.IsProjected() <> 1) {
	if (vectCRS.IsLocal() <> 1) {
		scale = scale * 0.000009;
		}
	}
else {	# CRS is projected; check coordinate units to adjust scale
	# get coordinate unit from the first axis of the planar coordinate system
	coordUnit$ = vectCRS.Coordsys.GetAxis(1).Unit.GetSymbol();
	scale = scale * GetUnitConvDist("m", coordUnit$);
	}
# set final dimensions for drawing
if (DrawingLegendView == 1) { # set dimensions for LegendView based on sample size
	width = 0.1 * SampleRect.GetHeight();
	halfSize = 0.5 * SampleRect.GetHeight();
	}
else {	# set dimensions for drawing elements in view
	scale = scale / 1000;	# conversion from meters to millimeters
	width = widthMap * scale;
	halfSize = 0.5 * lengthMap * scale;
	}
######################## Process ###########################
# Set line color, width, and draw fold line.
LineStyleSetColor(red,green,blue);
LineStyleSetLineWidth(width);
LineStyleDrawLine();
# Draw crossing symbols
LineStyleSetPosition(0.5);
LineStyleDropAnchor(1);
LineStyleLineTo(90, halfSize);
LineStyleMoveToAnchor(1);
LineStyleLineTo(-90, halfSize);